MMS: sodium chlorite (NaClO2) 28%
MMS1 or Activated MMS: chlorine dioxide (ClO2)

file Muriatic acid - impurities

  • 3volver
  • 3volver's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
17 Feb 2020 16:51 #62494 by 3volver
Muriatic acid - impurities was created by 3volver
When substituting muriatic acid for HCl, do you need to purify it first? If so, is an approved method for this published, including what % you end up with?

I found this article, but seems not to be conclusive: www.mmsinfo.org/infosheets/hcl_from_muriatic_acid.pdf

If you're not purifying muriatic acid, can you comment on any potential impacts of ingesting the impurities it contains?
www.differencebetween.com/difference-between-muriatic-acid-and-vs-hydrochloric-acid/

Please Log in or Create an account to join the conversation.

More
17 Feb 2020 19:37 - 17 Feb 2020 20:36 #62496 by CLO2
Replied by CLO2 on topic Muriatic acid - impurities
You can ignore the advice given in the article at differencebetween dot com because they have it backwards about which solution to add to the other. You always add acid to water, not the other way as they state.

The article you read at my website is info I got from a YT video plus my own experience. Outgassing HCL gas into distilled water seems to work, but I have no way to measure the percentage of HCL.

If you make CDS using 4% muriatic acid, the impurities should not end up in the CDS. To be sure, make CDS in a cold fridge. Might take 48 hours to extract all possible CLO2 from MMS.
Last edit: 17 Feb 2020 20:36 by CLO2.
The following user(s) said Thank You: 3volver

Please Log in or Create an account to join the conversation.

Time to create page: 0.312 seconds
Powered by Kunena Forum